How to unlock folders locked by the folder lock software without any password

Now, you don’t have to worry about the password of your locked folder. You can easily access or unlock your folder, without any password, or without knowing password of that locked folder.

Why should we lock a folder?

Just like any person needs security guard for his or her security, or any PC needs password for security, some important folders also need to be locked for security.And if we lock our folder we will have following benefits:-

• Unknown persons can’t be able to open that holder, and use the files inside it.


• Only you and the persons who know the password can use the files inside it.

How to lock a folder using folder lock software

Requirements:-

To lock a folder by using folder lock software you need:-

• A folder which will be locked.


• A, folder locking software should be installed on your PC, like Folder Access.

You can download Folder Access from below mentioned link.

http://www.topdownloads.net/software/view.php?id=156290

How to lock

When you start the folder access for the first time you will be asked the password to set. This password will be used to gain access to software and for locking and unlocking folders.

To lock a folder after installation, you just right-click on folder and select lock folder.

And to unlock folder, you just right-click on folder and select unlock folder.

While locking and unlocking folder, you will asked for the password. Please enter the password you had set when first time you started Folder Access.

How to unlock the locked folder, without password?

It happens that sometimes you may forget the password of your locked folder. Or you may want to open that folder and use the files and data inside it, but you don’t know the password. You can’t uninstall that software, because in this process also, it will ask for password.

But now you don’t have to worry much about this, because now you can open or unlock that folder without knowing any password. You have to follow simple steps.

Requirements:-

To unlock or open any locked folder you need:-

• A pen-drive or memory card (with card reader and mobile).


• A PC in which folder access (or the software by which the folder is locked) isnot installed.


• You can use a mobile phone instead of PC .

How to unlock

To unlock any folder, you have to follow these simple steps:-

1. Plug in the pen-drive or memory card (with card reader) into the PC (in which locked folder stored).


2. Copy the locked folder, and paste it into the pen-drive or memory card.


3. Unplug the pen-drive or memory card.


4. Plug in the pen-drive into another PC (in which folder lock software is not installed).
   OR (for memory card) plug-in the memory card into mobile phone.


5. Open the pen-drive or memory card.


6. Right click on folder and select Rename.                                                              OR (for memory card) select options of that folder and select Rename.


7. Change the coding name of the folder.


8. Unplug pen-drive from PC, OR unplug memory card from mobile.                And plug-in into 1st PC (in which folder lock software is installed).


9. Open the pen-drive OR memory card and see your locked folder will be unlocked.

Now your folder is successfully unlocked without using any password. You can open it and use the files inside it.

Hide Files or Folders Using Command Prompt

Trick to hide files and folders using Command Prompt
The most important thing is that, once hidden with this method, the files/folders cannot be viewed by any search options even if you click "Show All Hidden Files and Folders".

Hiding the most wanted files and folders is very important nowadays and it's really a tedious job too. In order to make this tedious job an easy one, i'm going to deliver you a the trick now.

For Example: You have a folder named "collegephotos" and this folder is stored in (Disk Drive E). You think that it should not be seen by strangers who use your PC.

For that you need to follow the following instructions

1. Press windowkey+R: Run command dialog box appears.


2. Now type "cmd" and hit enter. A command prompt window displays.


3. Now type "attrib +s +h E:\collegephotos" and hit enter.


4. The folder "collegephotos" will be hidden (Note: It cannot be viewed by any search options)
   
   (To view this folder again, use the same command but replace '+' with '-' on both flags 's' and 'h')

Burn a CD on Windows XP without using software

Windows XP comes with a builtin CD-copy feature that not many people are aware of. Although almost everyone has his/her favorite CD-copy software to stick with, it is still good to know about this CDR feature from Windows XP. You will find it very useful when you come to another PC that doesn't have a CD-copy software, and you can't just install your favorite software to it. With this feature, you can write some data or MP3 files to a CD/DVD, or erase a re-writable CD/DVD.

If you're using a Re-Writable CD (CD-RW), make sure the disc is blank. You might need to erase (or "format") it before use. For information how to erase a CD-RW on Windows XP without using any other software, see this article.

Requirements: You need to enable the CD-R feature on Windows XP. If you haven't done so, see this article.

 

1. Insert a Formated-ReWritable CD or a Recordable (CD-R) disc into the CD drive.


2. From Desktop, double-click on "My Computer".


3. Navigate to the files/folders you want to copy to CD. Select them and press "Ctrl-c" to copy.


4. Browse back to the CD-ROM, and press "Ctrl-V" to paste. The files/folders will show up as temporary files/folders at this time.
   
   


5. On the left panel, select "Write these files to CD".
   
   


6. The window "CD Writing Wizard" appears with the default CD name. Change the CD name if you wish, then click "Next".
   
   
   
   
   
   
   
   
   


7. The "CD Writing Wizard" starts to write files/folders to the CD:
   
   


8. Once the writing process is complete, the wizard will disappear and the CD-Rom will be ejected.

Registry Editing Has Been Disabled By Your Administrator

Whenever I open Run and type regedit and press enter a messageprompt appears saying “Registry editing has been disabled by your administrator“.



Let’s see how can we fix it.Here i got 3 Methods to fix this Problem which i have collected them from Net.


Method 1:

You can use a simple UnHookExec.inf to enable registry editing.

1. Download UnHookExec.inf
2. Right click on the downloaded file and select install.


Method 2:

For enabling you can also use the remove restrictions tool(RRT) by Sergiwa.com, if the method 1 doesn’t work for you.

1. First Download Remove Restrictions Tool
2. Run and check the registry tools and click apply.

Method 3:

If the above two methods does not work for you , you can also try executing a small vbscript which I found on major geeks.

1. First Download EnableRegEdit.vbs
2. Double click on the downloaded file to enable registry editing.

I hope at least one of the above will help to fix the trouble.

How to Set Up a Wireless Router

Setting up a wireless router is straightforward as long as you have a PC with a wireless network adapter, as well as an active high-speed Internet connection. You might also need a computer with a wired network adapter and router-specific setup software, which is typically included on a disc packaged with your router or available for download on the router manufacturer's support site.

If you have a router labeled with a Windows 7 logo and you are using Windows 7, setting things up should be quick if you follow the steps below.

Set Up Your Wireless Router on a Windows 7 PC

1. Connect the wireless router to your modem using an ethernet cable.

2. Connect your wireless router to a power source. Wait about a minute, and then continue to the next step.

3. Click the network icon in the notification area; the icon should look like a series of vertical bars, or a tiny PC with a network adapter alongside it.

4. Select your wireless network from the list of available networks to complete the setup process. By default, your network name will be the name of your router manufacturer.

Although newer routers connected to Windows 7 PCs are generally simple to set up, someproblematic wireless routers might require a little more attention. If you can’t set up your wireless router as explained above, follow the directions included with it. Chances are, you'll need to use one of the following two strategies.

Set Up Your Router Using the Setup Software

1. Make sure that your wireless router is completely disconnected from the modem, the computer, and the power source.

2. On your PC, insert the disc that came with your router, or download and run the latest version of the router's software from the vendor website.

3. Follow the on-screen instructions. The setup routine will ask you to connect components (including your modem and PC) in a certain order, and it may request that you temporarily connect your wireless router to a computer via an ethernet cable. You will also create a wireless network name and password at this point. If something goes wrong, you may want to consider manually configuring your wireless router.

Manually Configure Your Router Without Setup Software

1. Connect your wireless router to the modem, using an ethernet cable.

2. Connect the wireless router to a power source. Wait about a minute to ensure that your router is fully operational.

3. Connect the wireless router to your computer using an ethernet cable.

4. Log in to your router’s Web interface by opening a browser and entering the IP address of your router into the address bar. The IP address should be listed within your router’s documentation; if you can't find it, most routers use a common IP address such as http://192.168.1.1, http://192.168.0.1, or http://192.168.2.1.

5. Enter the default username and password, which you should find within your router’s documentation. Alternatively, visit Port Forward’s Default Router Passwords page.

6. Use the Web interface to set up a network name and password.

7. Disconnect your computer from the wireless router and then reconnect wirelessly. Finally, check out our router tips to speed up your wireless connection.

Caution: Be sure to use a password to protect your wireless network. Unauthorized parties can easily connect to an unprotected network, stealing your bandwidth as well as your personal data. Include a combination of letters, symbols, and numbers to build a better password, and don’t use words found in the dictionary. Don’t worry about memorizing your password; just write it down and file it away. The one-time minor inconvenience of connecting a computer to a password-protected network is worth the huge security advantage.